American access system ADV-1000 Guia do Utilizador descarregar pdf (Página 10)

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

2. Communicating with the Speedway Reader

Reader connectivity and control is accomplished via either network (Ethernet, TCP/IP) or serial (RS-232) interfaces on the

Speedway unit (see Figure 2-1).

If connecting via Ethernet, see Section 2.2. Note that if your network equipment is not compatible with the default network

configuration of the reader (DHCP), connecting via the serial interface will be necessary to establish initial command line-level

communications with the Speedway reader. If making a direct serial connection, see Section 2.1.

Configure PC to

Static IP Address

(e.g. 192.168.1.1)

Configure Reader

IP Address

Set Up Reader

Serial Port

Yes

Look Up IP

Address of

Reader via MAC

on DHCP Server

Set Up

Network

Addressing

Connect Reader

to N etw ork

Access to

DHCP Server?

Existing DHCP

Network?

Figure 2-1 Configuration Options

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 64 65

Sem comentários

American access system ADV-1000 Guia do Utilizador Página 10