American access system ADV-1000 Guia do Utilizador descarregar pdf (Página 54)

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

A sample command is show below:

> show network icmp

Status=0,'Success'

icmpInMsgs=0

icmpInErrors=0

icmpInTimeExcds=0

icmpInParmProbs=0

icmpInSrcQuenchs=0

icmpInRedirects=0

icmpInEchos=0

icmpInEchoReps=0

icmpInTimestamps=0

icmpInTimestampReps=0

icmpInAddrMasks=0

icmpInAddrMaskReps=0

icmpOutMsgs=0

icmpOutErrors=0

icmpOutDestUnreachs=0

icmpOutTimeExcds=0

icmpOutParmProbs=0

icmpOutSrcQuenchs=0

icmpOutRedirects=0

icmpOutEchos=0

icmpOutEchoReps=0

icmpOutTimestamps=0

icmpOutTimestampReps=0

icmpOutAddrMasks=0

icmpOutAddrMaskReps=0

The command usage for show network iface is shown below:

Usage: show network iface

Table 7-20 "show network iface" Response Parameters

Parameter Name format Description

IfIface DisplayString Interface Name

IfMTU integer Maximum Transfer Unit Size

IfMet integer Interface Metric

ifRx-OK integer Successful Receive Frames

ifRX-ERR integer Errored Receive Frames

ifRF-DRP integer Dropped Receive Frames

ifRF-OVR integer Receiver Overruns

ifTX-OK integer Successful Transmit Frames

ifTx-ERR integer Errored Transmit Frames

ifTx-DRP integer Dropped Transmit Frames

ifTx-OVR integer Transmitter Overruns

IfFlg DisplayString

B -- broadcast address has been set.

L --This interface is a loopback device.

M --All packets are received (promiscuous

mode).

O --ARP is turned off for this interface.

P --This is a point-to-point connection.

R --Interface is running.

U --Interface is up.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 64 65

Comentários a estes Manuais

Sem comentários

American access system ADV-1000 Guia do Utilizador Página 54

Comentários a estes Manuais