American access system ADV-1000 Guia do Utilizador descarregar pdf (Página 30)

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

Table 7-1 Error Codes

Error Code Error String Description

0 Success

1 Invalid-Command

Command could not be parsed and identified as one of

the commands supported by the interface

2 Invalid-Command-Parameter

One or more parameter types was unrecognized for

this command

3 Invalid-Parameter-Value

One or more parameter values was illegal or out-of-

range for this command

4 Parameter-Dependency-Error

Parameter value or combination was invalid in

combination with other parameters or values

5 Incomplete-Parameter-List

The parameter list was incompletely specified and the

command cannot be executed

6 System-Resource-Limit

Command could not be executed due to a resource

limit on the box (e.g., could not add a 4

trap receiver

because the device only supports three)

7 Unsupported-Command Reserved for Future commands

8 Permission-Denied

User does not have permission to access this

command

9 Previous-Command-In-Progress

The command was rejected because a previous

command is still in progress such that this one could

not be processed

10 Command-Being-Processed

The command cannot be finished right away; it is

being processed.

A sample error parameter string is shown below:

> typographical_error

Status=1,'Invalid-Command'

When a command’s action requires return parameters, they follow the error status, one parameter per line, and in the following

format:

parameterName=value0

parameterName=value1

…

parameterName=value9

The specific response parameters are detailed in the sections that follow.

7.3. Root Menu

Referring to Figure 7-1, the root menu contains the reboot command, and links to the config, show, and transfer sub-menus.

7.3.1. reboot Command

The reboot command instructs the reader to reboot. This may be used after a manual upgrade of the reader’s firmware or

application software. The reboot command may also contain an optional argument force that will cause the reader to reboot

even if a current operation is pending (such as a firmware download). If the force argument is absent, the reader will reject the

command if a current download is in progress. A help command entered at the command line interface will return the

following usage instruction:

> help reboot

reboot - Reboots the system.

Usage: reboot [force]

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 64 65

Comentários a estes Manuais

Sem comentários

American access system ADV-1000 Guia do Utilizador Página 30

Comentários a estes Manuais