American access system ADV-1000 Guia do Utilizador descarregar pdf (Página 228)

100

101

228 WIN-PAK User Guide

2 Set the Priority you want assigned to the se-

lected Action. If the priority is 0, the action state

will not be displayed in the Alarm Monitor,

Control Map or Floor Plan View. [1 is the highest

priority, 99 is the lowest.]

3 Select the Time Zone during which you want

the action group activated. The default setting is

Always, meaning the defined actions take effect

regardless of the time.

4 Select any Command Files you want activated

in response to the selected Action. A command

file must be created to perform CCTV camera/

monitor switching.

5 If a Sound File is to be activated in response to

the action, it is selected here.

6 Select the Write to History option if you want

the action written to the history file.

Select the Print option is you want this action

printed on the alarm printer.

7 Insert the Message you want sent to the Alarm

Detail view in response to the action.

8 Click OK to save the Action Group settings and

return to the Action Group database window.

ADV Action Groups

To view a list of all actions available for a particular

type of device, open the Action Group database

from the Device option on the WIN-PAK

Configuration menu.

Within each Action Group, you can view the specific

actions assigned to the group by selecting the Detail

View check box.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 776 777

Comentários a estes Manuais

Sem comentários

American access system ADV-1000 Guia do Utilizador Página 228

Comentários a estes Manuais