American access system ADV-1000 Guia do Utilizador descarregar pdf (Página 302)

302 WIN-PAK User Guide

4 Select the Firmware Version being used in the

panel.

This refers to the version of firmware of the

PROM chip in your PW-2000 panel. The default

is 8.2. If your panel has a different firmware

version, enter the number here. Different panel

options are available, depending on which

firmware version is being used.

5 Indicate the Status of the panel.

Active is used when a panel is configured and

present.

Inactive should be used for a panel that is

present but temporarily disconnected for mainte-

nance.

Not Present allows a system to be defined before

the physical installation is complete.

Card additions or deletions sent to an Inactive

panel are saved until the panel is made active. If

the panel is marked Not Present, no transactions

are saved.

6 Enter the panel's hardware Address. This

address corresponds to the DIP Switch setting on

the control panel and falls within the range of

one to eight. Consult the PW-2000 Installation

Manual for details.

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 776 777

Comentários a estes Manuais

Sem comentários